 |
Inflatable Solution Provider in China |
|
|
| Home | About Yolloy | Products | Article | Our Quality | FAQ | Order & Pay |
|
Inflatable aqua park obstacle course
Item：WP-B03
Material: Commercial grade pvc tarpaulin
Detail:
For this inflatable aqua park obstacle course that features water play areas, it is made up of such as ladder corner, t joint road,jungle slide,long corner,step road and other water games elements. We used 0.6~0.9mm pvc tarpaulin, it high heat welding structure, the park size is about 16mx16m, number of parts are 16pcs, conditions for participation is age 6 years old & over 100cm tall,max no of passengers are approximately 38 people (number of people who can board simultaneously),number of safety management is 3 staff.Following are 3D design drafts of inflatable aqua park obstacle course for your reference:
 How to assemble the inflatable aqua park obstacle course? Please unpack the park elements and open the valve cap firstly: a.)Insert the nozzle of the pump into the valve,and lock it in place by twisting it clockwise,Start the pump to start inflating the element - you will need 230V power supply for this. b.)When you have inflated the product up to about 85% first shut off the pump,then disengage it by twisting it counterclockwise (check with a manometer that the pressure it 0.05-0.07 bar),and cover the valve.  c.)For park elements with a "D" securing ring on their bottom,connect the flexible rope as shown in the image.Individual elements contain a different number of fixing points - if possible,connect a flexible rope to each of them. Once you have inflated all elements,place them one by one on the water near the shore,and connect them according to the plans of the park.Elements fitted with top eyelets should be joined using a securing rope threaded through the eyelets,having connected the elements,cover their union with the Velcro flap,and used D-ring and belt buckle connecting two elements.  Then towing to the final location: After connecting the elements of the water park on the shore,very slowly tow them - with a jet ski,speedboat or boat -to their final location,using flexible ropes fitted into the bottom D-ring securing points of a larger element,although certain elements of the water park are heavy,after inflating them they can be put to water manually (6-8 people).If you have purchased a large,extreme size water park,you will need a crane truck to lift the heavier elements onto the water surface.To facilitate lifting,we have fitted larger elements of the water park with D-rings. Related Products:
|
Home |
About Yolloy |
Products |
Article |
Our Quality |
FAQ |
Order & Pay |
SiteMap
Copyright © 2023 Inflatable Solution Provider in China All Rights Reserved
Copyright © 2023 Inflatable Solution Provider in China All Rights Reserved